The machine is designed for producing napkins, cloths and sheets of non-woven materials.
|Material||non-woven, spunlace, spunbond|
|Roll diameter on the unwind, mm||up to 800 (up to 1200 upon request)|
|Roll width on the unwind, mm||up to 900 (up to 1600 upon request)|
|Inner roll diameter on the unwind, mm||76|
|Roll diameter on the rewind, mm||up to 250 (over upon request)|
|Inner roll diameter on the rewind, mm||50 (other winding rolls for cardboard cores with the diameter from 30 to 76 can be produced upon request)|
|Rewind speed||up on 200|
|Perforation interval, mm||150, 300, 600 standard (100 - 2000 upon request)|
|Perforation hole size||20|
The machine is designed for slitting, rewinding and perforating of non-woven materials, model PM-05.
The machine is designed for producing napkins, cloths and sheets of non-woven materials. It has the following options: rewinding and slitting either with perforation or without it. The material can also be rewound without slitting.
|Roll width||120 - 500 mm|
|Diameter of the unwind roll||up to 700 mm|
|Inner diameter of unwind roll||76 mm|
|Inner diameter of the rewind roll||25 - 40 mm|
|Diameter of the rewind roll||up to 80 mm|
|Rewind speed||up to 500 m/min|
|Tolerance of the set length on the rewind||+-0,03 mm|
|Noise level under the max. speed||less than 85 dBA|
|Max. installed capacity||2 kW|
|Pneumatic pressure||0,55 - 0,6 MPa|
|Power supply||3 phase, 380 V, 50 Hz|
|Weight of machine excluding control box||950 kg|