The machine is designed for rewinding different roll materials. This model allows edging and cutting of the roll into two parts if needed.
| Material | paper |
| Roll diameter on the unwind | up to 1150 mm |
| Roll width on the unwind | up to 1680 mm |
| Inner roll diameter on the unwind | 76/152 mm |
| Roll diameter on the rewind | up to 250 mm |
| Inner roll diameter on the rewind | 76/50 mm |
| Rewind speed | up to 200 m/min |
| Control panel | touchscreen |
The machine is designed for rewinding different kinds of paper. Finished product: rollers of necessary width, diameter and density of winding.
Machines options:
| Width of the unwind roll, mm | up to 1680 |
| Diameter of the unwind roll, mm | up to 1000 |
| Inner diameter of unwind roll, mm | 76 |
| Inner diameter of the rewind rolls, mm | 76 |
| Maximal diameter of the rewind roll, mm | 300 |
| Number of simultaneously wound rolls | 1 - 2 |
| Number of knives | 2 |
| Rewind speed, m/min | up to 200 |
| Unwinding shaft | pneumatic expansion |
| Pneumatic pressure, MPa | 0,55 - 0,6 |
| Tolerance of the set length on the rewind, m | ±0,5 |
| Noise level under the maximal speed, dBA | less than 85 |
| Maximal installed capacity, kW | 6 |
| Weight of machine excluding control box, kg | 1030 |
| Edge control device | optional |
| Hydraulic lift of the unwind roll | optional |
| Material tension | automatic |
| Diameter sensor on the unwind and rewind | provided |
| Material length meter | provided |
| Edging | provided |
