The machine is designed for cutting different kinds of adhesive tapes, foam and other roll materials. The roll is loaded manually as well as knife feed. The moving of the cutting unit with the pace set on the control panel starts upon pressing the button. The moving of the cutting unit with the pace set on the control panel starts upon pressing the button.
|Max. roll diameter, mm||400|
|Roll width, mm||1600|
|Inner diameter of the core, mm||76|
Semiautomatic roll cutter is designed for cutting without rewinding rolls of different kind of adhesive materials, spunbond, insulating and foam materials. The cutting width is set by the operator on the control panel. Moving the cutting unit starts upon pressing the button. The knife feed is done manually.
|The roll width||up to 1600 mm|
|Diameter of rolls||up to 400 mm|
|Inner diameter of rolls||76 mm|
|Minimal width of the rolls to be cut||10 mm|
|Noise level under the max. speed||less than 85 dBA|
|Limit deviation of the set width||+-0,3mm|
|Pneumatic pressure||0,55 - 0,6 MPa|
|Power supply||3 phases, 380 V, 50 Hz|