SRR-02

SRR-02

Automatic roll cutter is designed for cutting rolls of different insulating materials. The roll is loaded manually. The cutting is performed automatically according to the parameters set on the control panel.

Machine type automatic
Knife type flat
Max. roll diameter, mm 150
Roll width, mm 1000
Inner diameter of the core, mm 36/55

Order Back to catalog Printable version

Automatic roll cutter is designed for cutting rolls of different insulating materials without rewinding. The cutting width, number of cuts is set by the operator on the control panel. After pressing the button “start” the roll is cut in automatic mode.

Machine options:

  • Fixation of the rolls by means of a pneumatic fixing device
  • Automatic movement of the cutting unit
  • Automatic knife feed
  • Flat knife/upper knife feed
  • Knife feed speed control
The length of the core (with the roll width 900 mm) 1000 mm
The length of the core (with the roll width 1000 mm) 1100 mm
Diameter of rolls up to 150 mm
Inner diameter of cores 36/55 mm
Minimal width of the rolls to be cut 8 mm
Noise level under the max. speed less than 85 dBA
Pneumatic pressure 0,55 - 0,6 MPa
Power supply 3 phase, 380V, 50Hz
Dimensions 2115x900x1900 mm