The semiautomatic machine is designed for cutting cardboard cores. The width and number of cuts are set on the screen of control panel. The feeding of the core is done automatically in accordance with the cutting program set on the control panel.
|Knife feed||pneumatic drive|
|Inner diameter of the core||38-152 mm|
|The length of the core||2000 мм (up to 3500 on request)|
|Width of cut||from 10 mm|
|Wall thickness of the core||up to 20 mm|
The machine is designed for cutting cardboard cores in automatic mode. An operator places the cardboard core manually and after that sets the width and number of cuts on the control panel. After pressing the button “start” the core is being cut according to the cutting program.
This model of the machine allows cutting cores with an internal diameter from 38 to 152 mm.
|The length of the core, mm||2000 (up to 3500 on request)|
|Minimal width of cut, mm||15|
|Inner diameter of the core, mm||38 - 152|
|Wall thickness of the core, mm||up to 20|
|Cutting time, seconds||from 2|
|Power supply||3 phases/380V, 50Hz|
|Dimensions (LxWxH), mm||2750х780х1460|