The machine is designed for cutting cardboard cores with the manual knife feed. On this model of machine, the cutting width is set manually, the knife feed is carried out manually.
|Inner diameter of the core||76-152 mm|
|The length of the core||2000 mm (up to 3500 on request)|
|Width of cut||from 15 mm|
|Wall thickness of the core||up to 15 mm|
The machine is designed for cutting cardboard cores. An operator places the cardboard core manually, sets the width of the cut and does cutting.
This model of the machine allows cutting cores with an internal diameter from 76 to 152 mm.
|The length of the core, mm||2000 (up to 3500 on request)|
|Minimal width of cut, mm||15|
|Inner diameter of the core, mm||76 - 152|
|Wall thickness of the core, mm||up to 15|
|Cutting time, seconds||from 2|
|Power supply||3 phases/380V, 50Hz|