The machine for cutting cardboard cores with a pneumatic drive feed knife. On this machine model, the cutting width is set manually. The knife is supplied by a pneumatic actuator when the button is pressed.

Core cutter GRM-02
Knife feedpneumatic drive
Core movementmanual
Inner diameter of the core76-152 mm
The length of the core2000 mm (up to 3500 on request)
Width of cutfrom 15 mm
Wall thickness of the coreup to 20 mm
Core cutter GRM-02
Core cutter GRM-02
Core cutter GRM-02
Core cutter GRM-02


The machine is designed for cutting cardboard cores. An operator places the cardboard core manually, sets the width of the cut and does cutting.

This model of the machine allows cutting cores with an internal diameter from 76 to 152 mm.

Machine options:

  • Manual placement of the cardboard core
  • Pneumatic knife feed upon pressing the button
  • Knife feed speed control
  • Manual core movement
  • Manual setting of the cutting width
  • Cutting by the disk knife


The length of the core, mm 2000 (up to 3500 on request)
Minimal width of cut, mm 15
Inner diameter of the core, mm 76 - 152
Wall thickness of the core, mm up to 20
Cutting time, seconds from 2
Weight, kg 180
Power supply 3 phases/380V, 50Hz