This Machine is designed for the application of HOT-MELT adhesives on the roll materials.
|Rolls width||up to 200 mm|
|Max. diameter of roll on the unwind||600 mm|
|Max. diameter of roll on the winding||600 mm|
|Inner diameter of rolls||76 mm|
|Number of take-up rolls||1|
|Max. speed||20 m/min|
This Machine is designed for the application of HOT-MELT adhesives on the roll materials. This machine is used for the production of a medication patch. The adhesive machine is a device which rewinds rolls of larger length into smaller rolls with glueing and the substrate layer (paper) if it is necessary.
The machine provided with three modes of operation: "Filling", "Work with an overlap of paper on the material of substrate layer with an adhesive" and "Work without overlap of paper on the material of substrate layer with an adhesive".
Switching between them is performed by corresponding switches installed on the control`s panel.
|Rolls width, mm||up to 200|
|Maximal diameter of roll on the unwind, mm||600|
|Maximal diameter of roll on the winding, mm||600|
|Number of rolls on the winding||1|
|Inside diameter of rolls on the unwinding and winding, mm||76|
|Maximal speed of rewind, m/min||20|
|Alignment of edge||provided|
|Electricity supply||380 V, 50 Hz|