This line is intended for the application of adhesives to various types of materials, both with the substrate and without it. The line comes with or without a glue head.
|Rolls width||1200 mm|
|Max. diameter of roll on the unwind||1200 mm|
|Max. diameter of roll on the winding||600 mm|
|Inside diameter of rolls||76 mm|
|Number of take-up rolls||2|
|Max. speed||75 m/min|
This Machine is designed for the application of HOT-MELT adhesives on the roll materials. This machine is used for the production of a medication patch. The adhesive machine is a device which rewinds rolls of larger length into smaller rolls with glueing and the substrate layer (paper) if it is necessary.
The machine provided with three modes of operation: "Filling", "Work with an overlap of paper on the material of substrate layer with an adhesive" and "Work without overlap of paper on the material of substrate layer with an adhesive".
Switching between them is performed by corresponding switches installed on the control`s panel.
|Rolls width, mm||up to 1200|
|Diameter of take-off roll, mm||up to 1200|
|Diameter of take-up roll, mm||up to 600|
|Number of take-up rolls||2 (revolver type of winding)|
|Weight of roll, kg||up to 1000|
|Inside diameter of paper core, mm||76|
|Maximal mechanical speed, m/min||75|
|Adjustment of tension of the material, kg||0-35 ±0,5|
|Tracking accuracy hem of material, cm||±0,5|
|Electricity supply||380V, 50 Hz|