The machine is designed for producing napkins, cloths and sheets of non-woven materials.
Material | non-woven, spunlace, spunbond |
Roll diameter on the unwind | up to 800 mm |
Roll width on the unwind | up to 900 mm |
Inner roll diameter on the unwind | 76 mm |
Roll diameter on the rewind | up to 250 mm |
Inner roll diameter on the rewind | 50 mm |
Rewind speed | up to 200 m/min |
Perforation interval | 150, 300, 600 mm |
Perforation hole size | 20 mm |
The machine is designed for slitting, rewinding and perforating of non-woven materials, model PM-05.
The machine is designed for producing napkins, cloths and sheets of non-woven materials. It has the following options: rewinding and slitting either with perforation or without it. The material can also be rewound without slitting.
Material | non-woven, spunlace, spunbond |
Roll width on the unwind, mm | up to 900 (up to 1600 upon request) |
Roll diameter on the unwind, mm | up to 800 (up to 1200 upon request) |
Inner roll diameter on the unwind, mm | 76 |
Inner roll diameter on the rewind, mm | 50 (other winding rolls for cardboard cores with the diameter from 30 to 76 can be produced upon request) |
Type of knives used for longitudinal cutting of material | disk knife |
Roll diameter on the rewind, mm | up to 250 (over upon request) |
Perforation interval, mm | 150, 300, 600 standard (100 - 2000 upon request) |
Perforation hole size, mm | 20 |
Distance between perforation holes, mm | 1 |
Rewind speed, m/min | up to 200 |
Installation possibility of embossing rolls | provided |