The machine is designed for cutting cardboard cores with the pneumatic knife feed. The cutting width of the model is set manually. The knife feed by pneumatic drive starts upon pressing the button. The specific feature is that the model allows cutting cores with the inner diameter from from 38 mm.
| Knife feed | pneumatic drive |
| Core movement | manual |
| Inner diameter of the core | 38-152 mm |
| The length of the core | 2000 mm |
| Width of cut | from 15 mm |
| Wall thickness of the core | up to 20 mm |
The machine is designed for cutting cardboard cores. An operator places the cardboard core manually, sets the width of the cut and does cutting.
This model of the machine allows cutting cores with an internal diameter from 38 to 152 mm.
Machine options:
| The length of the core, mm | 2000 |
| Minimal width of cut, mm | 15 |
| Inner diameter of the core, mm | 38 - 152 |
| Wall thickness of the core, mm | up to 20 |
| Cutting time, seconds | from 2 |
| Weight, kg | 180 |
| Power supply | 3 phases/380V, 50Hz |
