Core cutters

GRM – PA

 
Knife feed pneumatic drive
Core movement automatic
Inner diameter of the core, mm 38-152
The length of the core, mm 2000 (up to 3000 on request)
Width of cut, mm from 15
Wall thickness of the core, mm up to 20
The semiautomatic machine is designed for cutting cardboard cores. The width and number of cuts are set on the screen of control panel. The feeding of the core is done automatically in accordance with the cutting sheet set on the control panel.

Read more >

GRM-02

 
Knife feed pneumatic drive
Core movement manual
Inner diameter of the core, mm 70-152
The length of the core, mm 2000 (up to 3500 on request)
Width of cut, mm from 15
Wall thickness of the core, mm up to 20
The machine is designed for cutting cardboard cores with the pneumatic knife feed. The cutting width of this model is set manually. The knife feed by pneumatic drive starts upon pressing the button.

Read more >

GRM - 03

 
Knife feed manual
Core movement manual
Inner diameter of the core, mm 70-152
The length of the core, mm 2000 (up to 3500 on request)
Width of cut, mm from 15
Wall thickness of the core, mm up to 15
The machine is designed for cutting cardboard cores with the manual knife feed. The cutting width of this model is also set manually.

Read more >

GRM-04R

 
Knife feed manual
Core movement manual
Inner diameter of the core, mm 70-152
The length of the core, mm 2000
Width of cut, mm from 15
Wall thickness of the core, mm up to 15
The machine is designed for cutting cardboard cores with the manual knife feed. The cutting width of the model is also set manually. The specific feature is that the model allows cutting cores with the inner dimeter from above 38 mm.

Read more >

GRM-04P

 
Knife feed pneumatic drive
Core movement manual
Inner diameter of the core, mm 38-152
The length of the core, mm 2000
Width of cut, mm from 15
Wall thickness of the core, mm up to 20
The machine is designed for cutting cardboard cores with the pneumatic knife feed. The cutting width of the model is set manually. The knife feed by pneumatic drive starts upon pressing the button. The specific feature is that the model allows cutting cores with the inner dimeter from above 38mm.

Read more >

GRM-04R25

 
Knife feed manual
Core movement manual
Inner diameter of the core, mm 25-152
The length of the core, mm 2000
Width of cut, mm from 10
Wall thickness of the core, mm up to 15
The machine is designed for cutting cardboard cores with the manual knife feed. The cutting width of the model is also set manually. The specific feature is that the model allows cutting cores with the inner dimeter from above 25mm.

Read more >
 

© «North-West Machine
Engineering Company » 2013.
All rights reserved


News Subscription


Our contacts:
196603, Saint-Petersburg, Pushkin,
Gusarskaya st., 4 lit. C, Russia
E-mail: info@czmp.ru, tel: 476-35-76

Czmp.net